Blog Archiv1es

Damage and premature refusal of piles

Abstract Pile damage during driving is relatively common, and probably occurs more frequently than is generally acknowledged. Unless the structural integrity of the pile is compromised, damage that leads to difficulty in driving, hence reduced final penetration of the pile, may not affect the foundation performance. However, for offshore applications where piles must be driven …more

Posted in 2016 WA Meetings, Meeting, Western Australia |

Computational limit analysis: from stability to deformations

Abstract The use of the finite element method for engineering analysis goes back to the 1950s. Since then, the method has undergone tremendous developments and is today a standard tool in many fields of engineering including structural, mechanical, and aerospace engineering. In geotechnical engineering, the method is used routinely for both stability and deformation analysis. …more

Posted in 2016 Victoria Meetings, Meeting, Victoria |

55th Rankine Lecture:
Hazard, Risk and Reliability in Geotechnical Practice (postponed to 8 DEC)

“Doubt is an uncomfortable condition, but certainty is a ridiculous one” – Voltaire Abstract More and more, society requires to know the risk which people, property and the environment are exposed to. The role of the geotechnical engineering profession should increasingly be reducing exposure to threats, reducing risk and protecting people. The objective of the 55th Rankine …more

Posted in 2016 Sydney Meetings, Meeting, Sydney |

55th Rankine Lecture:
Hazard, Risk and Reliability in Geotechnical Practice

“Doubt is an uncomfortable condition, but certainty is a ridiculous one” – Voltaire Abstract More and more, society requires to know the risk which people, property and the environment are exposed to. The role of the geotechnical engineering profession should increasingly be reducing exposure to threats, reducing risk and protecting people. The objective of the 55th Rankine …more

Posted in 2016 Queensland Meetings, Meeting, Queensland |

15th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG)

19-23 October, 2017 Wuhan, China www.15iacmag.org

Posted in Conferences & Events, International Events |

iYGEC6 – 6th International Young Geotechnical Engineers’ Conference

16-17 September, 2017 Seoul, Korea www.icsmge2017.org/iYGEC Call for abstracts Abstract submission form

Posted in Conferences & Events, General, International Events, News |

Cone Penetration Testing (CPT) and Seismic Dilatometer Testing (SDMT) Field Demonstration (fully booked)

Please click here for details of the Technical Presentation entitled “Key Learnings from conducting In Situ Testing”, by Professor Paul Mayne, which will commence at 6pm at the University of Melbourne, 234 Queensberry Street, Carlton, 2nd Floor, Lecture Theatre 217. About the demonstration For some time, the AGS has been been trying to arrange a …more

Posted in 2016 Victoria Meetings, Meeting, Victoria |

55th Rankine Lecture:
Hazard, Risk and Reliability in Geotechnical Practice

“Doubt is an uncomfortable condition, but certainty is a ridiculous one” – Voltaire Abstract More and more, society requires to know the risk which people, property and the environment are exposed to. The role of the geotechnical engineering profession should increasingly be reducing exposure to threats, reducing risk and protecting people. The objective of the 55th Rankine …more

Posted in 2016 Tasmania Meetings, Meeting, Tasmania |

Use of onshore test sites for developing soil characterisation methods and verifying foundation solutions

About the presentation For more than 50 years, the Norwegian Geotechnical Institute (NGI) has actively used onshore test sites for both Consulting and Research & Development (R&D) work. Whilst most of the test sites have consisted of soft clays, other soils such as over-consolidated clays, silts, sands and permafrost have also been represented. The sites …more

Posted in 2016 WA Meetings, Meeting, Western Australia |

AGS Sydney Symposium 2016

Ground Stabilisation Techniques for Problematic Soils & Unstable Rocks The Sydney Chapter of the Australian Geomechanics Society (AGS) is proud to present the 20th Annual Sydney Symposium which will be held on Friday 11th November 2016. The Symposium forms part of the continuing program of events by the Sydney Chapter of the Australian Geomechanics Society …more

Posted in 2016 Sydney Meetings, Meeting, Sydney, Sydney News |

Abandoned Mine Subsidence Geomechanics

This is a joint presentation with AusIMM Hunter Region. Analysing the mechanisms governing subsidence over old abandoned mines About Ebrahim Fathi Ebrahim Fathi is a Geotechnical Engineer with over nine years of experience in rock mechanics, and the design and stability analysis of surface and underground excavations. He served as a tunnel engineer for the …more

Posted in 2016 Newcastle Meetings, Meeting, Newcastle |

Be careful with reactive clays – some case histories

Abstract Reactive clays underlie much of Sydney and the surrounding areas. Guidance for design to cope with reactive soil movements is presented in AS2870 ‘Residential Slabs and Footings’. The principles for investigation and design are well established and should be known to practicing geotechnical engineers and engineering geologists in the Sydney area. Nonetheless, problems still …more

Posted in 2016 Sydney Meetings, Meeting, Sydney |

Harnessing Wave Energy – Geo-Development Challenges

Presented by AGS WA and the Society for Underwater Technology (SUT) Presentations These presentations are jointly organised by the Western Australia Chapter of the Australian Geomechanics Society (AGS) and the Offshore Site Investigation & Geotechnical Group (OSIG) of the Society for Underwater Technology (Perth Branch). Supporting Renewable Energy Projects using High Resolution Hydrographic and Geophysical …more

Posted in 2016 WA Meetings, Meeting, Western Australia |

Disruptive technologies and a view of the future for geotechnical practice

About the Presentation James’ presentation will provide a view on the role that emerging and established technologies can play in shaping the future of geotechnical practice – both in terms of ground characterisation and construction activity. James will discuss technologies that sit at various “technology readiness levels” – some having benefits to projects of today …more

Posted in 2016 Newcastle Meetings, Meeting, Newcastle |

Geotechnical Mapping Course – Melbourne

The Australian Geomechanics Society will be running a Geotechnical Mapping one-day training course at selected Chapters from August 2016. Please click here to download the registration form. This course is intended to complement existing courses offered by the AGS. The skills developed in the Soil and Rock Logging course are directly relevant to this course and …more

Posted in 2016 Victoria Meetings, Meeting, Victoria |

Geotechnical Mapping Course – Brisbane

The Australian Geomechanics Society will be running a Geotechnical Mapping one-day training course at selected Chapters from August 2016. Please click here to download the registration form. This course is intended to complement existing courses offered by the AGS. The skills developed in the Soil and Rock Logging course are directly relevant to this course and …more

Posted in 2016 Queensland Meetings, Meeting, Queensland |

Geotechnical Mapping Course – Newcastle

The Australian Geomechanics Society will be running a Geotechnical Mapping one-day training course at selected Chapters from August 2016. Please click here to download the registration form. This course is intended to complement existing courses offered by the AGS. The skills developed in the Soil and Rock Logging course are directly relevant to this course and …more

Posted in 2016 Newcastle Meetings, Meeting, Newcastle |

Geotechnical Mapping Course – Hobart

The Australian Geomechanics Society will be running a Geotechnical Mapping one-day training course at selected Chapters from August 2016. Please click here to download the registration form. This course is intended to complement existing courses offered by the AGS. The skills developed in the Soil and Rock Logging course are directly relevant to this course and …more

Posted in 2016 Tasmania Meetings, Meeting, Tasmania |

Geotechnical Mapping Course – Perth

The Australian Geomechanics Society will be running a Geotechnical Mapping one-day training course at selected Chapters from August 2016. Please click here to download the registration form. This course is intended to complement existing courses offered by the AGS. The skills developed in the Soil and Rock Logging course are directly relevant to this course and …more

Posted in 2016 WA Meetings, Meeting, Western Australia |

Geotechnical Mapping Course – Sydney

The Australian Geomechanics Society will be running a Geotechnical Mapping one-day training course at selected Chapters from August 2016. Please click here to download the registration form. This course is intended to complement existing courses offered by the AGS. The skills developed in the Soil and Rock Logging course are directly relevant to this course and …more

Posted in 2016 Sydney Meetings, Meeting, Sydney |