Simplified Geotechnical Analyses – “Back of the Envelope” Methods

Professor Harry Poulos, Kim Chan and Dr Tim Hull

Course fully subscribed

The availability of complex methods and software for geotechnical analysis and design may suggest that simplified methods of geotechnical analysis and design have now been superseded. However, there are several circumstances in which such methods are still applicable, and indeed essential, and these include:

The latter application is very important as there is a tendency for time-poor and less-experienced users to uncritically accept the analysis results.

This workshop will review the steps involved in identifying the critical design issues and developing appropriate geotechnical models for simplified analysis, and will then present methods that can be implemented via simple charts or equations that do not require computer programs, other than perhaps a spreadsheet for more convenient implementation.

About the presenters

Professor Harry Poulos Senior Consultant, Tetra Tech Coffey

Professor Harry Poulos joined the Department of Civil Engineering at Sydney University in 1965, and was appointed a Professor in 1982, a position he held until his retirement in 2001. In 1989, he joined Coffey Partners International, and is currently a Senior Consultant with Tetra Tech Coffey. He is also an Emeritus Professor at the University of Sydney and an Adjunct Professor at Hong Kong University of Science and Technology. He has been involved in a large number of high-rise and infrastructure projects in Australia and overseas, including the Burj Khalifa and the Dubai Creek Tower in Dubai, and the 720 km Egnatia Odos motorway in Greece. He has received a number of awards, the most recent being the 2020 Peter Nicol Russell Medal from Engineers Australia.

Kim Chan Senior Technical Director in Geotechnics, GHD

Kim Chan graduated from the University of Calgary in Canada with a BSc (Eng) degree and later received his MEngSc degree from the University of Sydney. He has over 40 years of post-graduate experience and is highly regarded in the industry for his ability to solve challenging geotechnical problems using practical and theoretically sound solutions. He has worked on all facets of geotechnical engineering and has published over 50 peer reviewed technical papers and book chapters on various geotechnical subjects. Kim is currently a Senior Technical Director in Geotechnics and previously held the position of Australasia and Asia Service Line Leader of Geotechnical Engineering in GHD for 8 years.

Dr Tim Hull Technical Director in Geotechnics, GHD

Dr Tim Hull is a Technical Director in Geotechnics for GHD and had been associated with the GHD geotechnical group for over 20 years as a technical advisor whilst working at The University of Sydney. He joined GHD full-time in 2006 and has led the GHD geotechnics analytical team on some milestone projects covering various geotechnical aspects. He holds a Bachelor of Engineering (Civil, Honours) degree and a Doctor of Philosophy degree from the University of Sydney. Tim’s more than 30 publications include notable peer-reviewed journals and conference papers on a variety of topics which reflect his experience in analysis over a wide-range of areas in geotechnical engineering.


Topics Covered

  1. Introduction and basic soil properties.
  2. Shallow footings – bearing capacity and settlement/consolidation.
  3. Pile design – axial and lateral capacity, lateral loading, single and group settlement.
  4. Slope stability – limit equilibrium, stability charts and rock slope stability.
  5. Retaining wall design – gravity walls and soil nail walls.
  6. Excavation and groundwater control, including impact of dewatering.

Who Should Attend

The workshops will be designed for engineers, geologists and other professionals.

It is envisaged that each participant will have some industry experience and, as a minimum, a knowledge of soil mechanics and geotechnical engineering to Bachelor of Civil Engineering standard.

Cost

Early bird prices (purchased before May 31)

AGS Members: $825
Non-Members: $1045

Standard prices (after May 31)

AGS Members: $990
Non-Members: $1210

Tickets

Members and student members are required to login to access the AGS member price. Only one student member ticket can be purchased per order.

More information about logging in to this website can be found here.

Payment via credit card is available and processed by Stripe. The Australian Geomechanics Society will not store or have access to your credit card information and Stripe adhere to strict security and PCI compliance for processing online transactions.

Upon purchase an email and tax invoice will be sent to the buyer. Attendees will also receive emails with their tickets attached, as well as link to download the tickets if they are misplaced.

This course has sold out.

Engineers Australia members participating in AGS technical sessions can record attendance on their personal CPD logs. Members should refer to Engineers Australia CPD policy for details on CPD types, requirements and auditing guidelines.