Newcastle Chapter

Limitations of simplified methods for the design of tunnels in bedded formations

David Oliveira PhD, MIEAust, CPEng


The design of flat and semi flat-roofed tunnels or driveways, i.e. with a large arch radius to roof span ratio, in Sydney has been proven successful over time. The horizontally bedded nature of Sydney’s Hawkesbury Sandstone draws designers to the voussoir beam theory. Such analogy and the associated method of analysis can be easily implemented in computer spreadsheets, which significantly facilitates the design of semi flat-roofed tunnels in geological conditions such as Hawkesbury Sandstone. Similar application is also seen in the design of roadways in coal mines.

Like any other engineering simplified model or theory, the voussoir beam theory has some limitations. However, it seems that some of these limitations are not well understood and often ignored and/or misinterpreted. Such lack of understanding of the theory and its limitations often raises question about the applicability of the analytical solution in practice, misleading engineers to believe that the only reliable and comprehensive design method is through numerical analysis such as Distinct Element Method (DEM). This presentation investigates the applicability of the analytical or closed-form solution of the voussoir beam theory through comparison with numerical modelling, focusing on some of the perceived limitations and their impact on the typical designs. The results illustrate that the voussoir beam theory can be confidently used in practice if its limitations are well understood and good engineering judgment is applied to take the local geology into account. In addition, the results also demonstrate that some of the limitations can be on the conservative side. For example, the potentially positive effect of high horizontal stresses ignored in the voussoir beam theory may explain why some of the unfavourable conditions are less pronounced in practice.

About David Oliveira

David is a Principal and Chartered Geotechnical Engineer with over 16 years of experience and highly regarded technical competence. David holds a PhD in Rock Mechanics from the University of Wollongong and is currently a Technical Expert and Advisor within the Underground Space, Ground Behaviour and Numerical Modelling groups of excellence within Coffey.

Engineers Australia members participating in AGS technical sessions can record attendance on their personal CPD logs. Members should refer to Engineers Australia CPD policy for details on CPD types, requirements and auditing guidelines.