Cover
Number 24, August 1993
Australian Geomechanics Journal
Number 24, August 1993
August 1993
For access to past issues, please login or become a member of the Australian Geomechanics Society.
If you wish to purchase individual papers, please note the title, author/s and the issue of the journal and contact the National Secretary
In this issue
1
2
Contents,Editorial and Society Notes
3
The case for the new piling code
4
Review of joint Australia/New Zealand Draft Piling Code
5
Pile design in the new Canadian Limit States Design Code
6
Pile capacity in sand - The critical depth myth
7
Accounting for installation effects in pile design
8
Propping up a piling paper
9
Dynamic pile load testing - Warts and all
10
The use of pile driving analyser at a hospital complex in Malaysia
11
Pile integrity testing
12
Pile driving analyzer testing - A critical view of the "Warts and All"
13
The specification of static pile testing
14
The design of change in piling technology
15
Prediction of ground vibration induced by pile driving
16
Static and dynamic soil displacements caused by pile driving
17
Centrifuge modelling for the development of new piled bridge abutment design techniques
18
Load test on instrumented rock socketed pile for new Glebe Island Bridge, Sydney
19
50 Cavill Avenue, Surfers Paradise, top down construction
20
The construction of large-diameter bored piles under bentonite on the West Gate Freeway Project, Melbourne
21
Correlation of moisture content with the uniaxial compressive strength of Ashfield Shale
22
Do bored piles get tired of standing up straight?
